Dance
Dance Top Picks

Weaving Blog

FREE Tutorial: How to Create Exciting Textural Effects With Cramming & Spacing

“Cramming and spacing” might sound like a plan to reorganize your stash, but in the language of weaving it is a way of distributing your warp unevenly in the reed so as to create exciting visual and textural effects.

cram and space fabric at window

You are not limited to using this weaving texture technique with any particular weave structure, though it is often used most effectively with very simple weaves. It can add interesting patterns to a plain weave, and spices up a twill by giving a curve to the distinctive diagonal lines. In a lightweight cotton or linen yarn it can be used for beautiful sheer curtains, or weave with wool for a striking statement scarf.

FREE Guide: 7 Simple Scarf Tips Every Weaver Should Know

Scarf Weaving With Confidence

Download this free PDF guide and get 7 great tips for weaving success in every scarf project! Get my FREE guide »

Crammed and spaced weaving

For your threading you use exactly the same draft that you would use to weave the fabric ‘normally’. The cramming and spacing is done in the reed. I set up my loom with a sample warp of 144 ends in an extended point draw, which allowed me to experiment with different reed plans.

 threading for cram and space samples

If I were to sley and weave this normally in a 2/2 twill I would see something like this drawdown.

twill drawdown

The extent to which the warp is crammed and spaced is up to you, but there are two useful rules of thumb to start you off:

  • Vary the sett so that the most dense sections are twice the usual sett and the least dense are empty dents.
  • Plan your sleying so that the average density across the width of your warp is the same as your usual sett.

For example, my samples were woven with a cotton yarn, which I would usually set at 20 epi. Twice the usual sett would therefore be 40 epi. If I crammed 40 ends into one inch of the reed, and then left one inch completely empty, I would have an average sett of 20 epi.

In fact, my threading lends itself to grouping 24 ends into a crammed section. Because I was using a 10 dpi reed, I needed six dents to hold four ends each. Then I left six dents empty. For my first samples I alternated six dents sleyed at 40 epi with six empty dents across the whole warp.

 reed plan for first sleying

sleyed warp with crammed and spaced ends

Once the loom is prepared, weaving proceeds as usual, though you will need a firm beat to pack your weft into the densely sleyed warp.

On the loom, the warp tension and the action of the reed will keep your work stretched out, but as soon as you take it off the loom it will start to change. The threads at the edges of the crammed areas will start to migrate into the empty spaces. Don’t be alarmed! This softening of the edges is what creates the appearance of curves in twill patterns. Wet finishing will encourage this process.

You can see the contrast between ‘on loom’ and ‘after finishing’ in the images below.

cram and space on the loomcram and space after finishing

Tips and ideas for further exploration

  • You can cut off and re-sley your warp to create different effects in different pieces. I re-sleyed my warp so that the points were centered in the crammed bands.
second cram and space reed plan 

finished cram and space with points

  • Although you want some movement of the threads, you don’t want your spacing to disappear completely. Yarns with a bit of grip, such as cotton and linen, or yarns which can be fulled, will provide a more stable fabric than very slippery yarns.
  • Once you are confident in working with ‘average sett’ you can vary the sleying in much more subtle ways, gradually working from zero, one, two, three ends per dent up to your maximum.
  • You can also vary the density of your weft, either gradually or by weaving crammed and spaced stripes. To make sure that you leave a consistent gap between bands of weft, you can use cardboard spacers or a few picks of a thick, slippery yarn which can easily be pulled free. It is best to remove the spacers before winding on to the cloth beam or the bulk tends to build up very quickly.

FREE Guide: 7 Simple Scarf Tips Every Weaver Should Know

Scarf Weaving With Confidence

Download this free PDF guide and get 7 great tips for weaving success in every scarf project! Get my FREE guide »

Leave a Reply

Your email address will not be published. Required fields are marked *

Leave a Reply