Quilting Blog

August’s Free Mug Rug Pattern Is Red Hot!

red hot summer mug rug

This month’s FREE mug rug pattern looks like a bright summer checkerboard pattern and it uses and fun, fast strip piecing method! This project will be so easy that you’ll want to make one in every color.

Got enough mug rugs? Add a few extra layers of batting or some heat-resistant fabric and you’ve got a super cute hot pad or trivet for serving up some summer fun! 

[Want to save this tutorial for later? Click here for a free downloadable PDF file.]

fabric needed

Fabrics needed:

  • Four red printed fabrics
  • Three white printed fabrics
  • Batting (at least 7″ x 11″)
  • Backing fabric (at least 7″ x 11″)
  • Binding strip (2″ x 36″)

Cutting instructions:

  • Choose one fabric to be your backing. Cut it to 7″ x 11″.
  • From the same fabric, cut the binding strip (2″ x 36″).
  • From the remaining six fabrics, cut one 1-1/2″ x 13″ strip from each.

Sewing instructions:

Step 1:

strips sewn together

Sew the strips together lengthwise (always using a quarter-inch seam allowance), alternating the red and the white strips. Press the seams toward the red strips.

Step 2:

sew strip set into tube

Fold the strip set in half lengthwise and sew the outside strips to each other to form a tube.

cross cutting the strip set

Trim the end of the tube and cross cut the tube into 2″-wide sections. Cut six sections.

Step 3:

Unsew the tube at one of the seams. Lay the section flat. 

unsew strip sets

For the next section, undo the seam that’s in between the bottom two fabrics of the first strip set. This will create the staggered checkerboard effect.

Repeat unsewing each tube at the seam that connects the bottom two fabrics of the previous strip as show in the photo. Lay out the strip sets carefully to ensure that the fabrics squares create diagonal lines. 

Step 4:

press the seams open

Sew the strip sets together and press the seams open on the back as shown above.

Step 5:

layer on batting and backing

Layer the checkerboard fabric on top of the batting and backing, and quilt the layers together. Use a simple quilt-in-the-ditch as shown or get creative and quilt diagonal lines through each of the squares.

finished mug rug

Bind the mug rug with the binding strip as you would any quilt. Finish the binding with a machine or hand stitch on the back. Enjoy your fun and cheerful mug rug!

[Want to save this tutorial for later? Click here for a free downloadable PDF file.]

Did you miss the other mug rugs from this series? Get the designs from AprilMayJune and July right here on The Craftsy Blog.

2 Comments

Cocopatch

love Diane’s patterns!

Reply
Linda

Thank you very much for sharing your mug rug pattern. Makes for great gifts. Thank you again.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Leave a Reply