Dance
Dance Top Picks

Crocheting Blog

Have You Heard of This Unusual Crochet Technique?

Hairpin lace is a crochet technique similar to broomstick lace, but it’s done between two metal prongs rather than over a broomstick handle. It was originally made on large U-shaped hairpins with thin cotton to create delicate, intricate crochet lace. Today, we use commercial hairpin lace looms and different weights of yarn for garments, headbands, belts, purse handles and more.

Some of the beautiful items you can make if you learn how to make hairpin lace

You can make beautiful items with hairpin lace. Photos via Birgit Tüchsen of By Number 19

These gorgeous hairpin lace projects are by Birgit Tüchsen of the lovely and popular blog By Number 19. The headband and the scarf on the right were created using just one strand of hairpin lace, while the more complex scarf on the left and the beautiful stole were made by joining several strips of hairpin lace together.

I have only just started my adventures with hairpin lace, but it really is true that it looks a lot more complicated than it actually is. I learned very quickly, and getting comfortable with the technique has given me heaps of design ideas.

This tutorial is just a starting point to show you how to create a strip of hairpin lace. It’s almost the crochet equivalent to learning how to make a granny square! Once you know the basics, you can go on to explore different yarns, stitches and ways of joining your strips. Looking for some ideas? Check out some patterns here.

Save This Hairpin Lace Tutorial

Lovely Lacy Crochet

Get access to a downloadable, printable version of this tutorial and three other lovely lace techniques — for free!Get My FREE Guide »

What you’ll need

  • A hairpin lace loom. The one I used is a two-clip hairpin loom by Clover and retails for about $25 to $30. It’s compact, sturdy and has an genius system for making long lengths of lace. You can also buy a cheaper loom that just has two prongs and two simple longer bars. Or you can make your own loom using knitting needles and cardboard tubes!
  • Yarn. I used a quality light worsted weight acrylic yarn. You will also need two contrasting colors of a 4-ply cotton for your extender threads.
  • Crochet hook. The size depends on the yarn weight, but generally I would use a half size or even a full size larger than you would normally use. I used a size G (4mm) hook.
  • Scissors and a darning needle
Gathering supplies to make hairpin lace

Preparing your hairpin lace loom

The easiest loom to use has clips at the top and bottom, but you’ll mostly work without the top clip. Squeeze the clips to open and insert the prongs in the small circular sockets. When you release the clip, the prongs will be secure.

The clips have numbered marks so that you can set the prongs evenly. The prongs’ eyelets should be at the bottom.

The Clover hairpin lace loom

Put the prongs in at an even distance — the loom here is set with the prongs 4 cm apart, at the No. 4 marker. To make your hairpin lace slightly wider, move the prongs out to a higher numbered marker.

Hairpin lace loom close up

The eyelets in the prongs are a great design feature of this loom because they allow you to extend your work onto thread. You need to attach this before you start making lace. 

Attaching extender thread to your loom

Cut two lengths of cotton thread about 36″ long. You will see later why they should be different colors! Tie each one through an eyelet using a double knot.

Attaching extender thread to a hairpin lace loom

Tie the other ends of the extender threads together using a simple knot. This will prevent your long length of hairpin lace falling off the ends.

Tie a knot in the extender thread for the hairpin lace

Making hairpin lace

Step 1:

Make a slip knot in your yarn, as you would to begin crocheting. Loop it over the right-hand prong of the loom. The tail end should hang loosely in front, and your working yarn should be behind the left-hand prong. Hold the working yarn as if you were crocheting normally so that it has an even tension.

The knot of the slip knot should lie in the center of the prongs at all times. As you work, your crochet stitches should all be made on this midline.

How to make hairpin lace step 1

Step 2:

Turn the entire loom counter-clockwise 180 degrees so that it is facing the other way.

Turning the hairpin lace loom

The working yarn on the back left in the photo above will come around the prong so that it will again be on the left, behind the prong with your slip knot. The slip knot should still be between the prongs, and the working yarn should be above the loop of the slip knot.

Ready to start the first stitch hairpin lace

Step 3:

Insert your crochet hook through the loop on the left. The hook should pass under the front loop and up in front of the back loop.

How to make hairpin lace step 3

The next few steps are a basic single crochet stitch:

  1. Put the working yarn around your hook (yarn over).
  2. Pull up a loop through the loop on the loom.
  3. Yarn over again.
  4. Pull yarn through so you have one loop on your hook.

You might need to hold the tail end or even the slip knot at this point. It is fiddly, but the later stitches get easier. The stitch you have made should be in the center of the prongs.

Step 3 how to make hairpin lace

Step 4:

Now, you’ll need to move your hook to the opposite side of the loom. Point your crochet hook downward. Slide the loop on the hook along the shaft so that you can flip the hook behind the prong on the right. Just pass the end of the hook over the prong.

Step 4 how to make hairpin lace

Then, keeping hold of the shaft and sliding the working loop toward the hook, allow the hook to lie vertically at the back of the loom.

Step 4 how to make hairpin lace crochet hook to the back

Step 5:

Rotate the loom again, moving it clockwise 180 degrees so that your hook is in the front. Make sure you are working in the center of the prongs. You’ll make another single crochet stitch.

  1. Insert the hook through the loop on the left of the loom, going up through between the front loop and the back.
  2. Yarn over.
  3. Pull the yarn through. You will have two loops on your hook.
  4. Yarn over.
  5. Pull the yarn through both loops on your hook. Your SC is complete!
Step 5 how to make hairpin lace

Starting out and getting the hang of holding the loom is tricky at first, but that is all there is to it! To make more hairpin lace, simply repeat Steps 4 and 5 as many times as you like.

If you have a larger, simpler loom, make your lace with the top bar in place to keep the prongs stable. Just pass the hook through between the prongs each time.

Counting your loops.

When following a pattern, the instructions will probably tell you to make a definite number of loops. If the pattern says 200 loops, for example, that means you should have 200 loops on both the right and left prongs — not 100 on each.

To keep count, use a spare piece of contrasting yarn as a stitch marker. Just tie a small piece around the prong after you have completed 20, 30, 40 loops — whatever number suits you or the pattern.

Using stitch markers when making hairpin lace

What happens when the hairpin lace loom is full?

Even though hairpin lace looms often look small, eyelets on the prongs let you extend your hairpin lace an unlimited amount. With a few simple steps, you can let your hairpin lace onto your extender threads, giving you more room to continue creating the hairpin lace.

Step 1:

Put the top clip in place on the prongs. If you skip this part, your work could fall out when you take off the bottom clip.

Keep your working loop on the crochet hook, but move the yarn to the center of the hook and hold the hook horizontally and securely next to the top clip. Remove the bottom clip.

Putting hairpin lace onto extender threads step 1

Step 2:

Gently ease the lower part of the hairpin lace over the eyelets and off the prongs. The extender threads will hold your lace and prevent tangling as you continue with your lace.

Easing the hairpin lace from the loom

Step 3:

This feels scary the first time, but everything will be OK! Allow the lace on the extender threads to drop loosely onto a table or surface. Replace the bottom clip, taking care not to trap any lace. Leave about six loops on each side of the loom before replacing the bottom clip.

You can now remove the top clip and make more hairpin lace.

Hairpin lace after moving onto the extender threads

Taking your finished hairpin lace off the loom

When you’ve completed all the loops you need, you can do a simple bind- off by making a chain after your last sc, cutting the yarn and pulling it through the chain stitch. You’ll weave it in eventually, but you can just leave it for now.

Finishing off hairpin lace by binding off

Remove the finished hairpin lace the same way you did when the loom filled up: clip on the top and remove the bottom clip. Ease the hairpin lace completely onto the extender threads.

A raw finished piece of hairpin lace

To save your hairpin lace for later — like if you plan to combine several pieces — cut the extender threads from the loom, tie them in a knot and then roll up the lace. Storing them rolled and tied makes knots much less likely.

This is where the different color of extender thread is very helpful. You can easily see the contrasting color and pull them out when you’re ready.

Tying off finished hairpin lace and storing

More than just lengths of lace

The very talented blogger Heidi Hengel from Hello Speckless has used short strips of hairpin lace joined together to form a circle as the basis of her beautiful lace motifs. Don’t they look fantastic in this blanket?
Learn how to make hairpin lace and use it to construct a hexagon blanket

Hairpin lace hexagon motif and hexagon blanket by Heidi Hengel of Hello Speckless.

Save This Hairpin Lace Tutorial

Lovely Lacy Crochet

Get access to a downloadable, printable version of this tutorial and three other lovely lace techniques — for free!Get My FREE Guide »

6 Comments

Dona

We used this all the time when we were growing up. We made Afghans out of the strips. I have a couple in my knitting supplies.

Reply
Drea

My mom made shawls using the hairpin lace technique. I need to re-learn how to do it. thanks for the free guide. I know it will come back to me.

Reply
Kay Landreth

I used this technique more than 40 years ago (I’m OLD). Made my loom by bending a wire coat hanger into an open-end loop by bending the base around something round and just the size that I wanted. Still have it around here, someplace. It produced beautiful lengths that I crocheted together by their edges for an afghan.

Reply
susan718

My grandmother ( born before the turn of the century – the 20th century that is) made hairpin lace afghans by the dozen. I have one and so do my siblings. Maybe all the cousins got one, cant’ remember. I remember the prongs on her loom being much longer than the one you show here. .

Reply
Eric

Our grandmother had a custom crochet hook that she made for just this purpose (she was using a wooden or bone hook, depending on the size she was using, so it was easy to modify). This hook had two heads on it, which drastically sped up the process of crocheting from both sides of the lace. If you have a wooden hook, try carving a second head on the top of the hook.

Reply
Linda

I am now a Grandma age…Thank you for tutorial to remind me as I haven’t done this since a child with my grandma. I remember she had a shortened crochet hook.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Leave a Reply